MIPI over Chip2Chip Reference Design
This is the documentation for the MIPI over Chip2Chip reference design: MIPI CSI-2 cameras on a processor-less FPGA board (Tria AUBoard 15P with the Opsero RPi Camera FMC), controlled by a Zynq UltraScale+ host (AMD ZCU106) over AXI Chip2Chip and an Aurora 64B/66B link on an SFP+ cable.
It is a two-board system: the two target designs of this repository are not alternatives to choose from, they are the two halves of one system and both must be built.
User Guide
- Description
- Requirements
- Supported boards
- Build instructions
- Source code
- License requirements
- Target designs
- Cross-platform build runner
- Build the bitstreams
- Build the Linux image of the host
- Build the bare-metal application of the host
- Build the configuration memory file of the mezzanine
- Gather the boot images
- Other commands
- Programming the boards
- Running the system
- Yocto
- Deploying and updating the Linux image
- Booting the AUBoard from its configuration flash
- Using the cameras from Linux
- Showing the cameras on a DisplayPort monitor
- Bare-metal demo (ZCU106)
- Advanced: project structure and customization
- Troubleshooting
- Build failures
- The board does not boot at all, and the UART stays (almost) silent
- The link does not come up
- A register access hangs and everything stops responding
- The AUBoard loses power while the ZCU106 is running
- The AUBoard is back to its old design after a power cycle
- Linux: the video devices do not appear
- Linux: the picture is the wrong shape, or a small image spread over a large frame
- Linux: the picture is dark, or has a green cast
- Linux: capture starts but no frames arrive
- Linux: the DisplayPort monitor stays dark
- Revision History